0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera Axis Communications Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 49
 
AXIS M3014 Network Camera
Hardware overview
Connectors
Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet (PoE).
Caution
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded
network cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar
shall be shielded (STP) and intended for their specic use. Make sure that the network s witch is properly grounded. See
Electromagnetic Compatibility (EMC) for regulatory requirements.
Control button - The control button is used for:
ConnectingtoanAXISVideoHostingSystemservice.Seepage 34. To connect, press and hold the button for about
1 second until the Status LED ashes green.
ConnectingtoAXISInternetDynamicDNSService.Seepage 35. To connect, press and hold the button for
about 3 seconds.
Resetting the product to factory default settings. See page 40.
LED indicators
LED
Color
Indication
Green
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 MBit/s network. Flashes for network a ctivity.
Network
Unlit No network connection.
Green Steady g reen for normal operation.
Amber
Steady during startup and when restoring settings.
Status
Red
Slow ash for failed upgrade.
Green
Normal operation.
Power
Amber
Flashes green/amber during rmware upgrade.
Note
The Status LED can b e congured to be unlit during normal operation. To congure, go to Setup > System Options >LED.
See the online help for m
ore information.
The Status LED can be congured to ash while an event is active.
The Status LED can be congured to ash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
5