Samson Mixer SM10 User Manual

0

Out of 0 Ratings

Owner's of the Samson Mixer SM10 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 19
 
SM10
Owner's Manual
11
USING AN EXTERNAL EFFECT
If you prefer to use an external device for
eects processing, you can easily connect
the unit using the SM10 EFX bus. Follow
the simple steps below to interface your
processor:
1. Connect the EFX OUTPUT to the input of the external eect processor.
2. Connect the outputs of the eects processor to channel 9 stereo line input.
3. Set the EFX SEND control to the 12 o’clock position.
4. Raise the EFX knobs for the channels to which you want the external eect
to be applied.
5. Set the input level of the external ef-
fect so that the sound is not distorted
and so that the eect’s input meter
does not indicate a clipped signal.
6. Use the channel 9 Volume control to
adjust the level of the eects pro-
cessed by the external eects device.
7. The EFX bus can be monitored via headphones, by setting the PHONES
SOURCE switch to EFX.
NOTE: Listening to high volume levels through headphones for even a short
time may damage your hearing and/or your headphones. Always turn the
HEADPHONE LEVEL control all the way counterclockwise before connecting
your headphones. Slowly raise the HEADPHONE LEVEL until a comfortable lis-
tening level is reached. Noise over 85 dB can cause gradual hearing loss. Learn
to establish a safe listening level.
SM10 Quick Start

   Find Your Products By Category