TP-Link Video Game Controller TP-Link Video Game Controller User Manual

0

Out of 0 Ratings

Owner's of the TP-Link Video Game Controller TP-Link Video Game Controller gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 150
 
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
75
Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an
extra Connection type such as Dynamic/Static IP to connect to a local area network, then you
can check the radio button of Dynamic/Static IP to activate this secondary connection.
Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
Dynamic IP - Use dynamic IP address to connect to the local area network provided by
ISP.
Static IP - Use static IP address to connect to the local area network provided by ISP.
WAN Connection Mode
Connect on Demand - You can configure the Device to disconnect your Internet
connection after a specified period of the Internet connectivity (Max Idle Time). If your
Internet connection has been terminated due to inactivity, Connect on Demand enables
the Device to automatically re-establish your connection when you attempt to access the
Internet again. If you wish to activate Connect on Demand, put a check mark in the circle.
If you want your Internet connection to remain active all the time, enter 0 in the Max Idle
Time field.
Note:
Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time
(0~99 mins) because some applications visit the Internet continually in the background.
Connect Automatically - Connect automatically after the Device is disconnected. To use
this option, click the radio button.
Time-based Connecting - You can configure the Device to make it connect or disconnect
based on time. Enter the start time in HH-MM for connecting and end time in HH-MM for
disconnecting in the Period of Time fields.
Connect Manually - You can configure the Device to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the Device will disconnect
your Internet connection, and not be able to re-establish your connection automatically as
soon as you attempt to access the Internet again. To use this option, click the radio button.
If you want your Internet connection to remain active all the times, enter 0 in the Max Idle
Time field. Otherwise, enter the number in minutes that you wish to have the Internet
connecting last unless a new link is requested.
Note:
1) Sometimes the connection cannot be disconnected although you specify a Max Idle
Time (0~99 mins) because some applications visit the Internet continually in the background.
2) Only when you have set the system time on System Tools → Time Settings page, the
Time-based Connecting function can take effect.
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
Click the Advanced button to set up the advanced options.
Click the Save button to save your settings.
If you want to do some advanced configurations, please click the Advanced button, and then
the page shown in Figure 5-9 will appear.

   Find Your Products By Category