Datavideo DVD Recorder Datavideo HD HDD Recorder User Manual

0

Out of 0 Ratings

Owner's of the Datavideo DVD Recorder Datavideo HD HDD Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 35
 
22
Connecting to a PC
Connect the HDR unit IEEE-1394 output on the front panel to a PC*.
To set the HDR unit into HDD Mode first press the Menu button so that it is illuminated.
You will see the display change to the HDD Mode Menu.
Press the Next (▲) Button (right) to select ENTER and the display will show the HDD Enable Confirmation
Screen.
Press the Next (▲) Button (right) again to confirm, after a few seconds HDD Mode will be enabled
The PC should recognise that an external IEEE-1394 (Firewire) HDD has been connected. Select Open
Folder to View Files. The drive should also appear in My Computer as an internal HDD. Once connected the
HDR unit can be used just like any HDD. You can select the required files and drag and drop them to the
required destination.
To return the HDR unit to Deck Mode use “Safely Remove Hardware”. You will find “Safely Remove
Hardware” on the Taskbar.
Double click on Safely Remove Hardware and the dialog box will appear, select the Datavideo HDD IEEE
SBP2 Device and click on Stop. A second dialog box will appear.

   Find Your Products By Category