Datavideo DVD Recorder Datavideo HD HDD Recorder User Manual

0

Out of 0 Ratings

Owner's of the Datavideo DVD Recorder Datavideo HD HDD Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 35
 
6
How to fit a 2.5" SATA Hard Drive into the removable HE-1 Enclosure
If your HDR unit does not come with a hard drive already fitted inside the removable HDD
enclosure please follow these instructions to fit your own drive.
Please note the warnings on the removable caddy and only replace or install the hard drive
from the end indicated.
For up-to-date information about compatible hard drives please contact your local
Datavideo Office.
1.
Carefully remove the two screws from the
2.5" removable caddy end, then pull out the PCB.
2. Push the 2.5” hard drive into the socket side of the PCB.
turn the PCB over and use 4 supplied screws to secure.
3. Slide PCB and hard drive module into removable
caddy the right way up using the guide slots.
The USB and SATA connections should be visible
at the rear of the caddy.
4. Carefully replace the two screws to secure the
removable caddy end. Do NOT over tighten the screws.
Insert the caddy into the unit, USB and SATA connections end first.
When fully in, lock the caddy into place by pushing the lever to the left.

   Find Your Products By Category