Fostex DVR FR-2 User Manual

0

Out of 0 Ratings

Owner's of the Fostex DVR FR-2 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 110
 
64
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Cue menu)
Renaming a cue point (Rename)
1) Use the [MENU] dial to select "Cue" and press the [ENTER] key.
The display now shows the cue point list in which all cue points stored in the current file
are shown.
2) Use the [MENU] dial to select a desired cue point and press the [ENTER] key.
The display now shows the Cue menu.
(In the screen example above, "C01:Mark01" is selected.)
3) Use the [MENU] dial to select "Rename" and press the [ENTER] key.
The display now shows the screen as below, on which you can edit the cue name.
The cursor in [ ] is called "cue name cursor", while the cursor in the character options is
called "character selection cursor".
You can move the character selection cursor by using the [MENU] dial.
The display now shows the screen as below, and the recorder immediately locates to the
selected cue point. When the locate operation is completed, "Completed!" is shown on the
screen, and then the display returns to the Home screen.
"F001": Current file name
"C01": Current cue number and cue name
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
/ key
Acts the same as the [MENU] dial on the FR-2 panel.
key
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.

   Find Your Products By Category