Axis Communications Security Camera Axis Communications Security Camera User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera Axis Communications Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 50
 
AXIS M5013 PTZ Dome Network Camera
Recordings
Recordings
TheAxisproductcanbeconfigured to record video continuously or according to a n action rule:
• To start a continuous recording, see page 30.
• To set up action rules, see page 27.
• To access recordings, see Recording List, on page 30.
•Toconfigure camera controlled storage, see S torage, on page 38.
Recording List
Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the
event that triggered the recording.
To play or download a recording, follow these steps:
1. Go to Recordings > List.
2. Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take
a long time to complete.
3. Select the recording.
4. C lick Play to play the recording, or click Download to download the recording.
Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip fi le
containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The r ecordings are time-stamped
with the date and time they were downloaded (that is, not the date the
recordings were made).
Note
To play recordings in Windows Media Player, AXIS Matroska File Splitter must be ins talle d. AXIS Ma tros ka File Splitter
can be downloaded from www.axis.com/techsup/software
For detailed recording and video information, select a recording and click Properties.
To remove a recording, select the recording and click Remove.
Continuous recording
The Axis product can be configured to continuously save video to a storage device. See Storage, on page 38 for more information
about storage devices. To prevent the disk from becoming full, it is recom mended to configure the disk to a utomatically remove
old recordings see .
To start a continuous recording, follow these steps:
1. Go to Recordings > Continuous.
2. Select Enabled.
3. Select type of storage device from the Disk lis t.
4. Select a Stream profile to use for continuous recordings.
5. C lick Save to save and start the recording.
30

   Find Your Products By Category